C语言:TIM1模块产生PWM，带死区//Step1.开启TIM和相应端口时钟//启动GPIORCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA|RCC_APB2Periph_GPIOB|\RCC_APB2Periph_GPIOC|RCC_APB2Periph_GPIOD,\ENABLE);//启动AFIORCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO,ENABLE);//启动TIM1RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM1,ENABLE);//Step2.GPIO做相应设置，为AF输出//PA.8/9口设置为TIM1的OC1输出口GPIO_InitStructure.GPIO_Pin...
